Description
#bikeparts #wheelsntyres #axles
An axis instead of an eccentric
These axles are used instead of the eccentric in bushings with replaceable caps, and it is also possible to insert the front hub under the axle into the eccentric fork.
(To install the axis, you will need to drill the caps with a drill with a diameter equal to the inner cross-section of your axis. 12mm or 15mm)
In both cases, you get increased joint stiffness of the wheel with the bike.
The bushing is fixed with two bolts for the 5th hexagon, the bolts of increased strength (12.9) can be tightened without worry. I recommend pulling in the range of 8 to 12 newtons.
Before ordering, I recommend measuring the thickness of your dropouts so that I can make the axle as accurately as possible for you.
1,700 ₽ (💱), NEW
, Sale on Marketinn
Saratov, Russia
I'll send it
PATAUPITHECUS
, Market Delivery from 182